Advertisement
cpu data-plane
statistics
cpu party-bus statistics
stack-port 0–52
Defaults
No default behavior or values
Command Modes
EXEC Privilege
Command
Version 7.8.1.0
History
Related
show hardware stack-unit
Commands
clear hardware system-flow
s
Clear system-flow statistics from selected hardware components.
clear hardware system-flow layer2 stack-unit 0-7 port-set 0-1 counters
Syntax
Parameters
stack-unit 0-7
port-set 0–1 counters
Defaults
No default behavior or values
Command Modes
EXEC Privilege
Command
Version 7.8.1.0
History
Related
show hardware stack-unit
Commands
hardware watchdog
s
Set the watchdog timer to trigger a reboot and restart the system.
cpu data-plane statistics
Enter the keywords
statistics.
cpu party-bus statistics
Enter the keywords
statistics.
stack-port
Enter the keyword
port to clear the statistics of the particular stacking port.
Range: 0 to 52
Note: You can identify stack port numbers by physical inspection of
the rear modules. The numbering is the same as for the 10G ports.
You can also inspect the output of the show system stack-ports
command.
Introduced on S-Series
Display the data plane or management plane input and output statistics of the
designated component of the designated stack member.
stack-unit followed by 0 to 7 to select a particular
Enter the keyword
stack member and then enter one of the following command options
to clear a specific collection of data.
port-set
Enter the keyword
counters
followed by the keyword
the selected port-pipe.
Note: S25 models (S25N, S25P, S25V, etc.) have only port-pipe 0.
Introduced on S-Series
Display the data plane or management plane input and output statistics of the
designated component of the designated stack member.
to clear the data plane
to clear the management
followed by the port number of the stacking
along with a port-pipe number, from
to clear the system-flow counters on
S-Series Debugging and Diagnostics | 1583
0
1
to
,
Advertisement
