Advertisement
show diag
c
View diagnostics information.
Syntax
show diag {information | linecard number | summary | detail}
Parameters
information
linecard
number
summary
detail
Defaults
None.
Command Mode
EXEC
EXEC Privilege
Command
H
Version 7.5.1.0
History
Usage
Information
PoE Hardware Status Commands
Inspect C-Series line card internal commands with regard to Power over Ethernet (PoE).
show hardware linecard poe-status
c s
Display the status of the four C-Series PoE controllers and the entire registers associated with each
controller.
Syntax
show hardware linecard number poe-status
Parameters
linecard number
Defaults
No default behavior or values
Command Modes
EXEC
Command
Version 7.7.1.0
History
Version 7.5.1.0
Introduction
Warning:
Do not use this command when a line card is in a booting state.
Enter the keyword
Introduced on S-Series
Introduced on C-Series
information
Enter the keyword
by line card.
linecard
Enter the keyword
particular line card.
Enter a line card number.
Range: 0-7 for the C300
summary
Enter the keyword
detail
Enter the keyword
for detailed diagnostics information.
linecard
followed by the line card slot number.
C-Series Diagnostics and Debugging | 1527
to view diagnostics processes
for diagnostics information for a
brief diagnostics information.
Advertisement
