Advertisement
Advanced ASIC Debugging Commands
clear hardware unit
c
Syntax
Parameters
Defaults
Command Mode
Command
History
Usage
Information
show cpu-interface-stats
c
Syntax
Parameters
1510
|
C-Series Diagnostics and Debugging
•
clear hardware unit
•
show cpu-interface-stats
•
show hardware unit
•
show revision
Clear debugging information on the internal Gigabit Ethernet interfaces on the CSF and FP ASICs.
clear hardware {linecard number | rpm number} unit number counters
linecard
rpm
number
None.
EXEC
EXEC Privilege
Version 7.5.1.0
Introduction
Warning:
Use this command only when you are working directly with a technical
support representative to troubleshoot a problem. Do not use this command
unless a technical support representative instructs you to do so.
The command provides an immediate snapshot of the health of the internal RPM and line card CPU.
Generally this command is used in concert with Dell Force10 Technical Support engineers.
show cpu-interface-stats {cp | lp | rp1 | rp2}
cp
Enter the keyword
lp
Enter the keyword
linecard
Enter the keyword
card.
rpm
Enter the keyword
to clear information about an RPM.
Enter a number:
linecard
•
After the keyword
•
Range: 0-7 for the C3000
rpm
•
After the keyword
Range: 0-1
unit
•
After the
keyword:
For a line card: Range: 0 - 3
For an RPM: Range 0 - 4
cp
to display the CP's interface statistics.
lp
to display the LP's interface statistics
to clear information about a line
:
:
Advertisement
