Advertisement
online stack-unit
s
Place a stack unit in the online state.
Syntax
online stack-unit number
Parameters
number
Defaults
None
Command Mode
EXEC Privilege
Command
H
Version 7.7.1.0
History
Related
show environment (S-Series)
Commands
Buffer Tuning Commands
The buffer tuning commands are:
•
•
•
•
•
•
buffer (Buffer Profile)
c s
Allocate an amount of dedicated buffer space, dynamic buffer space, or packet pointers to queues 0 to
3.
Syntax
buffer [dedicated | dynamic | packets-pointers] queue0 number queue1 number queue2
number queue3 number
Parameters
dedicated
dynamic
packets-pointers
buffer (Buffer Profile)
buffer (Configuration)
buffer-profile (Configuration)
buffer-profile (Interface)
show buffer-profile
show buffer-profile interface
Warning:
Altering the buffer allocations is a sensitive operation. Do not use any
buffer tuning commands without first contacting the Dell Force10 Technical
Assistance Center.
Enter the stack unit number.
Range: 0 to 7
Introduced on S-Series
View S-Series system component status (for example, temperature, voltage).
Enter this keyword to configure the amount of dedicated buffer space per
queue.
Enter this keyword to configure the amount of dynamic buffer space per
Field Processor.
Enter this keyword to configure the number of packet pointers per queue.
S-Series Debugging and Diagnostics | 1577
Advertisement
