Advertisement
show hardware stack-unit
s
Display the data plane or management plane input and output statistics of the designated component of
the designated stack member.
Syntax
show hardware stack-unit 0-7 {cpu data-plane statistics [stack-port 0-52] | cpu
party-bus statistics | drops [unit 0-1 [port 0-27]] | stack-port 0-52 | unit 0-1 {counters |
details | port-stats [detail] | register}}
Parameters
stack-unit 0-7
{command-option}
cpu data-plane
statistics
cpu party-bus statistics
drops [unit 0-1 [port
0-27]]
stack-port 0-52
unit 0-1 {counters |
details | port-stats
[detail] | register}
Defaults
No default behavior
Command Modes
EXEC
EXEC Privilege
Command
Version 7.8.1.0
History
Version 7.7.1.0
Enter the keyword
stack member and then enter one of the following command options
to display a collection of data based on the option entered.
Enter the keywords
stack port
the keywords
plane statistics, which shows the Higig port raw input/output counter
statistics to which the stacking module is connected.
Enter the keywords
Management plane input/output counter statistics of the pseudo party bus
interface.
Enter the drops keyword to display internal drops on the selected
stack member. Optionally, use the unit keyword with 0 or 1 to select
port-pipe 0 or 1, and then use port 0-27 to select a port on that
port-pipe.
Enter this keyword and a stacking port number to select a stacking
port for which to display statistics. Identify the stack port number as
you would to identify a 10G port that was in the same place in one of
the rear modules.
Note: You can identify stack port numbers by physical inspection of
the rear modules. The numbering is the same as for the 10G ports.
You can also inspect the output of the show system stack-ports
command.
Enter the unit keyword followed by 0 or 1 for port-pipe 0 or 1, and
then enter one of the following keywords to troubleshoot errors on
the selected port-pipe and to give status on why a port is not coming
up to register level: counters, details, port-stats [detail], or
register
stack-port
Modified:
keyword range expanded from 49-52 to 0-52; output modified
cpu data-plane statistics
for the
drops
unit 0-1
port 0-27
[
[
detail
register
[
] |
}
Introduced on S-Series
stack-unit followed by 0 to 7 to select a particular
cpu data-plane statistics
and its number — 0 to 52 — to display the data
cpu party-bus statistics
option; the following options were added:
unit 0-1
counters
details
]] ;
{
|
S-Series Debugging and Diagnostics | 1585
, optionally followed by
, to display the
port-stats
|
Advertisement
