Graco SaniForce SDU Series Manual page 58

Electro-pneumatic Control Panel Display Screens
SDU SDU Event SDU Event Table Event Table Table
See Event Log, page 41
descriptions.
NOTE: The Event Identification Numbers
NOTE: NOTE:
in the following table consist of
values from BR2AB_evnt_eventGroup
and BR2AB_evnt_eventIndex (see
Variable Interface List, page
Identification Numbers are listed in the order of
BR2AB_evnt_eventGroup, BR2AB_evnt_eventIndex
Event Event Event Event Event Event
Identification Identification Identification
Number
Number Number
0,0 Software Error
0,1 E-stop or I/O Power Error
0,2 Comm. Bus Power Error
0,3 X20AO2622 Module Error
0,4 X20BC1083 Module Error
0,5 X20CM8281 Module Error
0,6 X20DO8322 Module Error
0,7 X20PS9400 Module Error
0,8 X20DS438A Module Error
0,9 Laser Position Sensor Error
0,10 Seal Pressure Sensor Error
0,11 Control Pressure Sensor Error
58
for detailed event
53). The Event
Event Event
Event Event Event Event
Identification Identification Identification
Number
Number Number
0,12 Pump Pressure Sensor Error
0,13 Control Pressure Low
0,14 Pump Pressure Low
0,15 Interlock #1 Open
0,16 Interlock #2 Open
.
0,17 Seal Not Deflated
0,18 Ram Movement Timeout
0,19 Seal Inflation Timeout
0,20 Laser Sensor Obstructed
0,21 Network Communication Error
0,22
Network Interlock Open
1,0 Position Sensor Dirty
1,1 File Not Found
1,2
USB File Header Error
1,3 USB Data Format Error
1,4 USB Not Connected
1,5 USB Operation Failed
2,0 USB Import Successful
2,1
USB Export Successful
3A5402J