Graco SaniForce SDU Series Manual page 50

Electro-pneumatic Control Panel Display Screens
Icon/Field
Icon/Field Icon/Field
Aux 1 1 1 Input Aux Aux Input Input
Aux 2 2 2 Input Aux Aux Input Input
Aux1 Output Aux1 Aux1 Output Output
Aux2 Aux2 Output Aux2 Output Output
Job Job Measurement Job Measurement Measurement
Delay Delay Delay
Current Scale Scale Value Value
Current Current Scale Value
* See Setting K-Factor, page 51
** See Setting Scale Feedback, page 51
50
Description
Description Description
CM8281–11 Input Voltage Asserted: >16 VDC. Not Asserted: <5 VDC
Select input type:
• None: Not monitored.
• Start/Stop: See Remote Operation, page
• Ready Interlock: The system will Alarm if Not Asserted.
• Job Complete: The system will complete and log a job if Asserted, provided there has
been some amount of material dispensed.
CM8281–21 Input Voltage Asserted: >16 VDC. Not Asserted: <5 VDC
Select input type:
• None: Not monitored.
• Start/Stop: See Remote Operation, page
• Ready Interlock: The system will Alarm if Not Asserted.
• Job Complete: The system will complete and log a job if Asserted, provided there has
been some amount of material dispensed.
CM8281–13 Output Voltage Asserted: 24 VDC. Not Asserted: 0 VDC
Select output type:
• None: Not monitored.
• System OK: Asserted while no Alarms are active.
• Pump Run: Asserted while the pumps are running.
• Sequence Complete: Asserted after an Automatic or Batching sequence has
completed.
• Container Low: Asserted when the system is below the "Container Low" point during
operation.
• Container Empty: Asserted when the system has emptied the container during
operation.
CM8281–23 Output Voltage Asserted: 24 VDC. Not Asserted: 0 VDC
Select output type:
• None: Not monitored.
• System OK: Asserted while no Alarms are active.
• Pump Run: Asserted while the pumps are running.
• Sequence Complete: Asserted after an Automatic or Batching sequence has
completed.
• Container Low: Asserted when the system is below the "Container Low" point during
operation.
• Container Empty: Asserted when the system has emptied the container during
operation.
Delay after a batch is completed, during which the amount pumped is still recorded.
Default is 2 seconds, but may be set up to 5 seconds.
Displays the current read value from the scale.
for more information.
for more information.
30.
30.
3A5402J