Graco SaniForce SDU Series Manual page 26

Electro-pneumatic Control Panel Display Screens
Specialty key key definitions definitions
Specialty Specialty key definitions
Key Description
Key Key Description Description
Exit
Exit Exit
Exit the keyboard or keypad. If the entry has not been saved, any displayed entry shown in
the top field of the keyboard or keypad is lost.
Backspace Backspace Backspace
Erase the last character of the displayed entry in the top field of the keyboard or keypad. This
key will erase one character each time it is pressed, or multiple if pressed and held.
Enter Enter Enter
When the desired value has been entered in the top field of the keyboard or keypad, press
the Enter key to save the value in the selected field on the display screen.
Shift Shift Shift
The shift key is a toggle between upper- and lower-case letters. When pressed, the selected
case is used on each key selected until the Shift key is pressed again. Switching screens will
reset the shift to lowercase on the new screen.
Polarity
Polarity Polarity
This key toggles the number in the Number Keypad between positive and negative.
Function Keys Keys
Function Function Keys
Key Key Key Description Description Description
Run
Run Run
Select the run screens.
• Automatic
• Manual
Recipes Recipes Recipes
Create or edit recipes.
• Material Recipes
• Container Recipes
Logs Logs Logs
View available logs.
• Event Log
• Job Log
Settings Settings Settings
Configure the SDU and connected devices.
• System Configuration Screen: Edit system configuration
• I/O Screen: Edit feedback and I/O settings, view I/O status
• Network Screen: Configure settings for network communication
• About: Display system and software information
26 3A5402J