Graco SaniForce SDU Series Manual page 39

Container Container Recipe Container Recipe Edit Recipe Edit Screen Edit
An empty drum is required for defining the container
recipe.
Icon/Field Icon/Field Icon/Field Description Description Description
Recipe Name Name
Recipe Recipe Name User-defined alphanumeric field, 19 characters maximum.
Lock Lock Lock When locked, the password defined on the System Settings page must be entered to
edit the selected recipe.
Numeric displays next to the icons are the pressure settings defined in the current
recipe. Changes entered here are not saved to the recipe. A locked recipe will not
allow changing these settings.
Ram Up Ram Ram
Momentarily press to raise the ram assembly. The ram will continue raising until the
ram has reached the top of its travel, unless manually stopped.
Ram Hold
Ram Ram
Momentarily press to keep the ram at the current location.
NOTE: This is an active hold and the system may momentarily energize Ram Up to
NOTE: NOTE:
keep the ram plate from drifting. Active hold is enabled for 5 seconds after any Pump,
Ram, Seal, or Air Assist command.
3A5402J
Screen Screen
recipe not locked
recipe locked
Ram Control Ram Ram
Up Up
Hold
Hold
Electro-pneumatic Control Panel Display Screens
Control Control
39