4. Attach the assembled top/channel frame to the side panels on top of the unit:
•
For rear-discharge, refer to Figure 7.20 below and use 2 sheet-metal screws on each end.
•
For non-grilled plenums, refer to Figure 7.21 on the facing page and use 2 sheet-metal screws on each
end.
Figure 7.20 Rear-discharge plenum top frame attachment to sides
64
Item
Description
1
Sheet-metal screws
2
Topframe
3
Viewshownfrom opposite side.
Vertiv | Liebert® CW™Installer/User Guide