Ec-Fan Assembly Positioned For Lifting - Vertiv Liebert CW Series Installer And User Manual

4. Refer to Figure 7.11 below for the recommended clearance from bottom of the unit to the top of the plenum for
access to install the fan(s).
• Place an EC-fan assembly on the lifting device.
(Figure 7.11 below, shows a duct lift as one option to lift the EC-fan assembly.)
• Position the lifting device so that it lines-up with the installation location of the EC-fan assembly.
• Use the device to lift the EC-fan assembly just above the top of the unit.
Figure 7.11 EC-fan assembly positioned for lifting
56
Item Description
1 Accessclearance area of 36 in. (914 mm)from top to bottom of unit
Vertiv | Liebert® CW™Installer/User Guide