Packaging Material; Handling The Unit While Packaged; Center-Of-Gravity Indicator - Vertiv Liebert CW Series Installer And User Manual

Upon arrival of the unit and before unpacking:
• Verify that the labeled equipment matches the bill of lading.
• Carefully inspect all items for visible or concealed damage.
• Report damage immediately to the carrier and file a damage claim with a copy sent to Vertiv or to your sales
representative.
• For initial access use a 7/32-in. Allen wrench for panel removal.
Equipment Recommended for Handling the Unit:
• Forklift
• Pallet jack
• Piano jacks
• Lift beam
• Slings
• Spreader bars

3.1 Packaging Material

All material used to package this unit is recyclable. Please save for future use or dispose of the material appropriately.

3.2 Handling the Unit while Packaged

ransport the unit with a forklift or pallet jack. If that is not possible, use a crane with slings and spreader bars that are rated
for the weight of the unit.
When using a forklift or pallet jack:
• Ensure that the fork length is suitable for the unit length and, if adjustable, spread to the widest allowable
distance that will fit under the skid.
• When moving the packaged unit, lift the unit from the end with the indicated labeling, and do not lift the unit
any higher than 4 in. (102 mm). Ensure that the opposite end of the skid still touches the floor. The unit must be
pulled by the forklift. All personnel except those moving the unit must be kept 12 ft (3.7 m) or more from the
unit while it is being moved.
• If the unit must be lifted higher than 4 in. (102 mm), all personnel not directly involved in moving the unit must
be 20 ft (5 m) or farther from the unit.
• On CW146 through CW400 models, Always refer to the location of the center-of-gravity indicators when lifting
the unit, see Figure 4.1 below.
Figure 4.1 Center-of-gravity indicator
24
Vertiv | Liebert® CW™Installer/User Guide