Junction Box For Single Fan Or Fan 3; Install Front Panels On Plenum - Vertiv Liebert CW Series Installer And User Manual

Figure 7.16 Junction box for single fan or fan 3
NOTE: For the high-volt terminal blocks, the wire-termination torque is 16-20 in-lbs.

6.2.5 Install front panels on plenum

Non-grilled plenum front panels require assembly and attachment before mounting the panels, see
discharge front-panel assembly
Grilled plenums do not require a frame assembly, see
60
Item Description
1 SHLDwire from unit harness
2 Fan(low-volt)wiring
3 Motor (high-volt)wiring
4 Green/Yellowgroundwire
on the facing page.
Front-discharge front-panel assembly
Non-grilled and rear-
on page 71.
Vertiv | Liebert® CW™Installer/User Guide