Compressor Plenum Parts Identification - Vertiv Liebert CW Series Installer And User Manual

Figure 7.6 Compressor plenum parts identification
NOTE: Not all parts are used in all plenum sizes: 26-in (660-mm) wide compressor plenums include 3
angle-mounting brackets and a front panel with quarter-turn fasteners.
NOTE: Compressor plenums shorter than 26 in. (660 mm) include 2 angle-mounting brackets and do
not include a front panel with quarter-turn fasteners.
50
Table 7.6 Compressor plenum parts and
quantities
Item Description
1 Front/Rear panel
2 Angle-mountingchannel
3 Angle-mountingbracket
4 Front panel withquarter-turnfasteners
5 Side panel
Not shown Sheet-metal screw
Quantity
1 or 2
2 or 3
2
1
1
varies
Vertiv | Liebert® CW™Installer/User Guide