Adjusting The High-Speed Compression Damping Of The Shock Absorber (50 Sx); Adjusting The Rebound Damping Of The Shock Absorber - KTM 50 SX 2020 Owner's Manual

10.5

Adjusting the high-speed compression damping of the shock absorber (50 SX)

Caution
Risk of injury Parts of the shock absorber will move around if the shock absorber is detached incorrectly.
The shock absorber is filled with highly compressed nitrogen.
–
Please follow the description provided. (Your authorized KTM workshop will be glad to help.)
Info
The effect of the high-speed setting can be seen in fast compression of the shock absorber.
10.6

Adjusting the rebound damping of the shock absorber

Caution
Risk of injury Parts of the shock absorber will move around if the shock absorber is detached incorrectly.
The shock absorber is filled with highly compressed nitrogen.
–
Please follow the description provided. (Your authorized KTM workshop will be glad to help.)
–
Push the splash protector to the side.
–
Using an open end wrench, turn adjusting screw
all the way.
Info
Do not loosen fitting
–
Turn counterclockwise by the number of turns corresponding
to the shock absorber type.
F02184-11
Guideline
High-speed compression damping
Comfort
Standard
Sport
Info
Turn clockwise to increase the damping; turn counter-
clockwise to reduce the damping.
–
Position the splash protector.
(50 SX)
–
Turn adjusting screw
ble click.
–
Turn counterclockwise by the number of clicks correspond-
ing to the shock absorber type.
F02185-10
TUNING THE CHASSIS 10
1
clockwise
2
!
2.5 turns
2 turns
1.5 turns
1
clockwise up to the last percepti-
31