11 SERVICE WORK ON THE CHASSIS
11.9
11.10
46
Removing the lower triple clamp
V00272-10
V00273-10
Installing the lower triple clamp
601602-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
(
–
Remove the start number plate. (
–
Remove front fender. (
Main work
–
1
Pull fuel tank breather
–
2
Remove nut
.
–
3
Release screw
, take off the upper triple clamp with the
handlebar and set aside.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
4
Remove protective ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing
–
Check whether upper steering head seal
tioned.
–
3
Push on protective ring
p. 41)
(
p. 87)
p. 44)
p. 53)
p. 54)
out of the steering stem.
.
p. 132)
1
.
2
is correctly posi-
.