10 TUNING THE CHASSIS
10.11
36
Adjusting the riding sag
B00292-10
Preparatory work
(50 SX)
–
Raise the motorcycle with a lift stand. (
(50 SX Mini)
–
Raise the motorcycle with a lift stand. (
–
Remove the rear wheel.
–
Remove the shock absorber.
–
After removing the shock absorber, clean it thoroughly.
Main work
–
Choose and mount a suitable spring.
Guideline
Spring rate (50 SX)
Weight of rider: 15 ...
25 kg (33 ... 55 lb.)
Weight of rider (stan-
dard): 25 ... 35 kg (55
... 77 lb.)
Weight of rider: 35 ...
45 kg (77 ... 99 lb.)
Spring rate (50 SX Mini)
Weight of rider: 15 ...
25 kg (33 ... 55 lb.)
Weight of rider (stan-
dard): 25 ... 35 kg (55
... 77 lb.)
Weight of rider: 35 ...
45 kg (77 ... 99 lb.)
Info
The spring rate is shown on the outside of the spring.
Smaller weight differences can be compensated by
changing the spring preload.
Finishing work
–
Install the shock absorber.
–
Remove the motorcycle from the lift stand. (
–
Check the static sag of the shock absorber. (
–
Check the riding sag of the shock absorber. (
–
Adjust the rebound damping of the shock absorber. (
p. 41)
p. 41)
(
p. 88)
(
p. 54)
30 N/mm (171 lb/in)
35 N/mm (200 lb/in)
40 N/mm (228 lb/in)
65 N/mm (371 lb/in)
75 N/mm (428 lb/in)
85 N/mm (485 lb/in)
(
p. 55)
p. 41)
p. 33)
p. 34)
p. 31)