KTM 50 SX 2020 Owner's Manual page 86

12 BRAKE SYSTEM
84
–
Remove screws
–
Take off cover
–
Press the brake piston back into the basic position and
ensure that brake fluid does not flow out of the brake fluid
reservoir; extract some if necessary.
F02208-10
–
Position the new brake linings.
Info
Always change the brake linings in pairs.
Ensure that the brake linings are correctly posi-
tioned in the holding spring.
–
Position the brake caliper on the brake disc.
The brake linings are correctly positioned.
F02207-11
–
Mount and tighten screw
Guideline
Screw, rear
brake caliper
–
Mount and tighten screw
Guideline
Screw, rear
brake caliper
F02206-10
–
Mount screw
Guideline
Screw, brake linings M5
–
Mount lock ring
(50 SX Mini)
–
Remove lock ring
–
Remove screw
–
Remove screw
F02164-10
5
.
6 7
with washer and membrane
3
.
M6x16 10 Nm (7.4 lbf ft)
4
.
M6x40 10 Nm (7.4 lbf ft)
2
.
8 Nm (5.9 lbf ft)
1
.
1
.
2
.
3 4
and screw .
8
.
Loctite ® 243™
Loctite ® 243™