Removing The Start Number Plate; Installing The Start Number Plate - KTM 50 SX 2020 Owner's Manual

11.16

Removing the start number plate

11.17

Installing the start number plate

–
Position the fuel tank.
–
Make sure that no cables or throttle cables are trapped or dam-
aged.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
–
Position the fuel tank breather in the steering stem.
R00530-11
Finishing work
–
Mount the seat. (
–
Remove screw
–
Unhook the start number plate from the brake line and remove
it.
H01425-10
–
Attach the start number plate to the brake line.
–
Position the start number plate.
Holding lugs
H01426-10
–
Mount and tighten screw
Guideline
Screw, start number
plate
H01427-10
SERVICE WORK ON THE CHASSIS 11
2
.
M6 10 Nm (7.4 lbf ft)
p. 57)
1
.
1
engage in the fender.
2
.
M6 4 Nm (3 lbf ft)
53