Service Work On The Chassis 11; Raising The Motorcycle With A Lift Stand; Removing The Motorcycle From The Lift Stand; Bleeding The Fork Legs - KTM 50 SX 2020 Owner's Manual

11.1

Raising the motorcycle with a lift stand

Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
11.2

Removing the motorcycle from the lift stand

Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
11.3

Bleeding the fork legs

–
Raise the motorcycle at the frame underneath the engine.
Lift stand (78929955100)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
401942-01
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
in stand bracket on the left side of the vehicle.
Info
Remove the plug-in stand before riding.
402581-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
(50 SX)
–
Release bleeder screws
Any excess pressure escapes from the interior of the
fork.
–
Tighten the bleeder screws.
F02179-10

SERVICE WORK ON THE CHASSIS 11

1
.
1
into the plug-
p. 41)
41