Table of Contents
Advertisement
10 TUNING THE CHASSIS
10.17
40
Adjusting the seat height
Warning
Danger of accidents Modifications to the suspension setting may seriously alter the handling characteris-
tic.
–
Ride slowly to start with after making adjustments to get the feel of the new handling characteristic.
E00746-10
E00745-10
E00746-10
Info
Make sure the installed gaps are even.
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
1
Remove nut
.
–
Hold the rear wheel with the link fork and remove screw
–
Position the shock absorber according to the required seat
height.
Guideline
Low seat position (standard)
High seat position
–
2
Position screw
.
–
1
Mount nut
and tighten the fitting.
Guideline
Screw, top
M10
shock absorber
Finishing work
–
Remove the motorcycle from the lift stand. (
p. 41)
2
.
A
B
45 Nm (33.2 lbf ft)
Loctite
®
243™
p. 41)
Advertisement
Table of Contents
