Installing The Air Filter; Cleaning The Air Filter And Air Filter Box - KTM 50 SX 2020 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.25
11.26
58

Installing the air filter

H01477-10

Cleaning the air filter and air filter box

Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
Info
Do not clean the air filter with fuel or petroleum since these substances attack the foam.
M01457-01
Main work
–
Position the clean air filter.
–
Position the rear holding lug. Lower the air filter box cover and
allow the front holding lug
Info
If the air filter is not mounted correctly, dust and dirt
may enter the engine and result in damage.
Finishing work
–
Mount the seat. ( p. 57)
Preparatory work
–
Remove the seat. ( p. 56)
–
Remove the air filter. (
Main work
–
Wash the air filter thoroughly in special cleaning liquid and
allow it to dry properly.
Air filter cleaner ( p. 132)
Info
Only press the air filter to dry it, never wring it out.
–
Oil the dry air filter with a high-grade air filter oil.
Oil for foam air filter (
–
Clean the air filter box.
–
Check intake flange for damage and looseness.
Finishing work
–
Install the air filter. (
–
Mount the seat. ( p. 57)
1
to snap in.
p. 57)
p. 132)
p. 58)