Table of Contents
Advertisement
15.9
Removing the clutch cover
Note
Environmental hazard Improper handling of fuel is a danger to the environment.
–
Do not allow fuel to enter the groundwater, the soil, or the sewage system.
Info
Fuel can emerge via the carburetor.
Capture emerging fuel using a suitable container.
15.10
Adjusting the clutch
–
Turn the knurled screw on the fuel tap all the way clockwise.
–
Lay the vehicle down on its left side.
–
Remove screws
–
Remove clutch cover
H01458-10
Preparatory work
–
Remove the clutch cover.
Main work
–
Turn the outer clutch hub
become accessible.
H01459-10
Condition
If there is no reference point:
–
Turn adjusting screws
detectable click.
–
Turn adjusting screws
basic setting.
Guideline
Basic setting of slip speed
H01479-10
Info
The springs may not be pretensioned by more than
17 clicks from the stop using the adjusting screws.
Condition
If the slip speed is too low:
–
Turn adjusting screws
TUNING THE ENGINE 15
1
.
2
with the seal ring.
(
p. 103)
1
until adjusting screws
2
counterclockwise to the last
2
clockwise by 9 clicks to the
8,700 ... 9,300 rpm
2
clockwise.
2
103
Advertisement
Table of Contents
