Adjusting The Rebound Damping Of The Fork (50 Sx) - KTM 50 SX 2020 Owner's Manual

10 TUNING THE CHASSIS
10.14
38

Adjusting the rebound damping of the fork (50 SX)

Info
The hydraulic rebound damping determines the fork suspension behavior.
F02189-10
Info
This is due to the volume of the hose and not due to a
defect in the fork airpump or the fork.
Read the accompanying KTM PowerParts instructions.
–
Adjust the air pressure as specified.
Guideline
Air pressure
Changing the air pressure in
steps of
Minimum air pressure
Maximum air pressure
Info
Never adjust the air pressure to a value outside the
stated range.
–
Disconnect the fork airpump from the left fork leg.
When disconnecting, excess pressure will escape from the
hose – the fork leg itself does not lose any air.
The fork airpump indicator switches off automatically after
80 seconds.
–
Mount the protection cap.
Info
Only mount the protection cap by hand.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1
Turn adjuster clockwise all the way.
Info
1
Adjuster is located at the upper end of the right
fork leg.
–
Turn counterclockwise by the number of clicks corresponding
to the fork type.
Guideline
Rebound damping
Comfort
Standard
Sport
2 bar (29 psi)
0.2 bar (3 psi)
1.4 bar (20 psi)
4 bar (58 psi)
p. 41)
15 clicks
12 clicks
10 clicks