®
SurroundVideo
Exposure Reference Channel set as Channel "1"
-
Exposure Reference Channel set as Channel "2"
-
Equalize Brightness Instructions
NOTE: For a SurroundVideo G5 NON-WDR camera, once the camera webpage is launched, you must
make sure that "Equalize Brightness" function is on. You do this by :
3. Launch the camera webpage
4. Click "Settings" and make sure the check box for "Equalize Brightness" has been selected in
order to turn the function on. (Shown in Image 6 below)
Page | 36
support@arecontvision.com
+1.818.937.0700
877.CAMERA.8
G5 Mini
www.arecontvision.com
avsales@arecontvision.com
Installation Manual