Camera Discovery, Setup And Configuration - Arecont Vision SurroundVideo G5 Mini Installation Manual

®
SurroundVideo
Camera Discovery, Setup, and Configuration
For camera discovery and setup, the AV IP Utility is recommended. The software can be found on the
CD included with your camera or at:
The AV IP Utility has the ability to provide multiple discovery options, including broadcast and multicast,
check the status of a camera, change camera settings, import and export camera settings via a .csv
file, and update firmware and/or hardware from virtually anywhere with a network connection.
Whether used for large installations that require an update to multiple settings, or smaller installations
where only one camera needs changed, the AV IP Utility tool is efficient and convenient for mass or
single camera uploads.
The AV IP Utility tool is compatible with all Arecont Vision® megapixel cameras. The user manual for
the software is included on the CD that came with your camera or available on our website.
1. Install the AV IP Utility Software as shown in Image 1. (Found on CD)
2. Run the AV IP Utility Software by double clicking on the icon as shown in image 1. (Found on
your desktop)
3. Click the Discovery Broadcast to display all Arecont Vision cameras on the network shown in
image 2. Duplicate IP Addresses typically indicate a conflict where one is left and one is
omitted; the AV UP Utility tool displays both.
Page | 33 support@arecontvision.com
+1.818.937.0700 877.CAMERA.8
G5 Mini
http://www.arecontvision.com/softwares.php.
www.arecontvision.com avsales@arecontvision.com
Image 1
Image 2
Installation Manual