Table of Contents
Advertisement
Wall Mount (D4S-WMT-B or D4S-WMT) Installation
Instructions (Sold Separately)
Inside the box:
A. Wall mount ( Fits ¾" NPT Standard)
B. Pack of three (3) machine screws
C. Pack of four (4) screws and four (4)
anchors
NOTE: Anchors and screws are good to be
used for concrete, wall block and red bricks.
NOTE: Screws by themselves can be used
in wood.
D. Mounting template
NOTE: D4S-WMT-B color is black and D4S-
WMT color is light grey.
Not included but needed:
#2 Phillips screw driver
B
A
Image 25
1.
Remove wall mount and hardware from the
box.
2.
Using the mounting template, prepare the
mounting provisions for camera
installation.
3.
Attach surface mount (Image 1B on Page
4) to wall mount as shown in Image 26
using three machine screws provided.
4.
5. Attach wall mount to the wall using screws
6. Connect Ethernet cable with Megaball
C
7.
Image 26
Run Ethernet cable through the wall mount
or any optional hardware suitable for the
mounting surface.
pigtail cable as shown on Image 27
Image 27
For installation of the camera, please
reference "Mounting the Camera".
Advertisement
Table of Contents
