Related Manuals for Arecont Vision H.264 Day/Night SurroundVideo Series
Summary of Contents for Arecont Vision H.264 Day/Night SurroundVideo Series
- Page 2 ® Arecont Vision H.264 Day/Night SurroundVideo Series Installation Manual ® H.264 Day/Night SurroundVideo Installation Manual Inside the box: Mounting the Camera: ® Arecont Vision SurroundVideo camera Mounting template Remove camera and hardware from the box. C. RJ45 female to female coupler D.
- Page 3 ® Arecont Vision H.264 Day/Night SurroundVideo Series Installation Manual If using in-ceiling mount, please use #2 Phillips head screwdriver to loosen the four In-Ceiling Mount (4) machine screws (Image 3) and remove in- ceiling mount housing from surface mount housing. (Image 4)
- Page 4 ® Arecont Vision H.264 Day/Night SurroundVideo Series Installation Manual Connecting External Power: (Optional) If the camera is powered by an outside power If you are using the side conduit opening on supply, 12~20VDC or 24VAC, connect the the surface mount, remove the conduit plug power cable shown in Image 8.
- Page 5 ® Arecont Vision H.264 Day/Night SurroundVideo Series Installation Manual Connecting Digital I/O: (Optional) Connecting Heater and Blower : (AV8185DN-HB and AV8365DN-HB only) To use digital I/O, connect the I/O cable shown in image 8. To run the heater and blower shown in Image 8, connect heater &...
- Page 6 ® Arecont Vision H.264 Day/Night SurroundVideo Series Installation Manual Adjusting Tilt, Pan and Focus: Align the holes in the camera with the Power on camera to adjust tilt, pan and focus. prepared holes on the mounting surface. Attach the camera with in-ceiling mount...
- Page 7 ® Arecont Vision H.264 Day/Night SurroundVideo Series Installation Manual To adjust the tilt, use a #2 Phillips screwdriver to loosen both screws on the sides of the plastic gimbal bracket 1/4 turn (Image 15 and 16). CAUTION: Do not remove the screws! Adjust lens tilt as required and tighten the screws from step 13 shown in image 17.
-
Page 8: Set Screws
® Arecont Vision H.264 Day/Night SurroundVideo Series Installation Manual Adjusting Each Sensor Tilt : ( AV8365DN only) NOTE: Each sensor tilt angle can be adjusted Day/Night Switcher by +/- 10° to remove the dead spot at dome bottom or at the horizon. - Page 9 ® Arecont Vision H.264 Day/Night SurroundVideo Series Installation Manual ® H.264 Day/Night SurroundVideo Pendant Mount SV-CMT Installation Instructions Inside the box: Pendant pole Top shield C. Pendant Mount D. One double sided hex key Pack of four (4) wood screws and four (4)
- Page 10 ® Arecont Vision H.264 Day/Night SurroundVideo Series Installation Manual ® H.264 Day/Night SurroundVideo Wall Mount SV-WMT Installation Instructions Inside the box: Top shield Wall mount C. One double sided hex key D. Pack of four (4) wood screws and four (4)
- Page 11 ® Arecont Vision H.264 Day/Night SurroundVideo Series Installation Manual ® H.264 Day/Night SurroundVideo Flush Mount Adapter Installation Instructions In-Ceiling Inside the box: mount Flange White Trim Ring Plate Flange Plate C. Top Plate D. Mounting template Pack of six (6) set screws, three (3)
- Page 12 ® Arecont Vision H.264 Day/Night SurroundVideo Series Installation Manual Using the Mounting template, cut a hole in Support surface for mounting. Insert Flush Mount Adapter into the hole. Lever Screw the “lever screws” until the flush mount Screw is snuggly installed, as shown in Image 31.
- Page 13 ® Arecont Vision H.264 Day/Night SurroundVideo Series Installation Manual ® H.264 Day/Night SurroundVideo Pole Mount Adapter Installation Instructions Inside the box: Attach SV-WMT, Wall Mount Adapter, to Pole Mount Adapter as shown in Image 37. Pole Mount Adapter 2x Compress Fittings 42.
- Page 14 ® Arecont Vision H.264 Day/Night SurroundVideo Series Installation Manual ® H.264 Day/Night SurroundVideo Corner Mount Adapter Installation Instructions Inside the box: Install Compress Fittings to Corner Mount Adapter as shown in Image 39. Corner Mount Adapter 2x Compression Fittings Attach Wall Mount Adapter to Corner Mount Adapter as shown in Image 40.
- Page 15 ® Arecont Vision H.264 Day/Night SurroundVideo Series Installation Manual ® H.264 Day/Night SurroundVideo Electrical Box Adapter Installation Instructions Inside the box: Electrical Box Adapter Pack of four (4) machine screws Not included but needed: #2 Phillips head screw driver ...
- Page 16 R. 12 .10...