Arecont Vision SurroundVideo G5 Mini Installation Manual page 11

®
SurroundVideo
6. Prepare the network cable with the supplied grommet and insertion tool as shown in Figure 3.
Figure 3
NOTE: When mounting the camera outdoors or in a wet environment, use of supplied grommet
is recommended. Ensure the grommet is properly seated flush with the camera housing.
7. Align the hole on SurroundVideo
the grommet on camera housing as shown in Figure 4.
Figure 4
NOTE: If using the side connection of the NPT port, you need to install the supplied grommet
without a through hole on the camera housing, and remove the cap covering the side entrance,
otherwise; leave the cap in place. If using the NPT port, always use Teflon tape around the
threads to ensure proper sealing. The conduit fits ¾" NPT standard. Ensure NPT port is facing
downward.
Page | 11 support@arecontvision.com
+1.818.937.0700 877.CAMERA.8
G5 Mini
www.arecontvision.com avsales@arecontvision.com
®
G5 Mini camera with the hole on mounting plate, and install
Installation Manual