Registration Of Rf Cards With Pins For Rf Card + Pin Mode; Registration Of Pin Only Mode - IDTECK 100R Manual

4. The first card read becomes the Configuration Card and the following RF Cards are regi
stered as User Access Cards. Once all User Access Cards have been registered, present t
he Configuration Card again to complete the registration. (Please keep the Configurati
on Card in a secure location for future changes.)
5. Now, the Main Unit is entered into the normal operation mode with factory defaulted s
ettings.
2 Registration of RF Cards with PINs for RF CARD + PIN
MODE
1. Apply 12 V DC to the unit.
All 3 LEDs will be flashing along with a powered-up melody (do mi sol me do..do mi sol
do~).
2. Press
3. Present RF Cards as follow to register Configuration Card and User Access Cards + 4~6
digit Personal Identification Number (PIN) for each User Access Card.
4. The first card read becomes the Configuration Card and the following RF Cards + PINs a
re registered as User Access Cards with assigned PINs. Once all User Access Cards and P
INs have been registered, present the Configuration Card again to complete the registr
ation.
(Please keep the Configuration Card in a secure location for future changes.)
5. Now, the Main Unit is entered into the normal operation mode with factory defaulted s
ettings.
3

Registration of PIN ONLY MODE

p.20 Initial Setup
from the keypad. (RF CARD + PIN MODE)