Optional Equipment/Accessories - Magnum Energy Sensata MagnaSine Owner's Manual

Appendix A – Specifi cations and Optional Equipment
A-2

Optional Equipment/Accessories

The following components are available for use with the MS-PAE Series inverter/charger. Some
of these items are required depending upon the intended use of the inverter.
MMP Series Enclosures
The MMP175-30D, MMP175-60S, MMP250-30D, and MMP250-60S enclosures are for single inverter
applications. The MMP Series enclosures have been specifi cally designed to combine all of the major
components required for a renewable energy system—inverter/battery disconnect, AC overcurrent
protection, grounding connections and a full system inverter bypass switch as a convenient way
to isolate the inverter for battery maintenance—into a single, easy to install pre-wired enclosure.
MP Series Enclosures
The MPSL, MPSH, MPDH enclosures have been specifi cally designed to easily work with multiple
stacked inverters. The MP enclosures feature convenient front-mounted AC and DC connections
and easy front panel operation. Depending on the MP enclosure, you can connect from 2 to 4
inverters together—using the MPX Series extensions—to handle your power capacity needs.
Router Control
The ME-RTR Router Control display panel provides operating information and setup/troubleshooting
capabilities for multiple inverters. Allows up to four MS-PAE inverters to be connected in a parallel
confi guration for increased inverter power.
Advanced Remote Control
The ME-ARC allows the advanced features of the MS-PAE inverter to be confi gured. This LCD
remote display also provides advanced monitoring/troubleshooting and includes a FAVS button
to access your favorite features quickly.
Auto Generator Controller
The ME-AGS-N is designed to automatically start your generator based on low battery condition
or high temperature. The AGS controller includes an input voltage jumper (for 12, 24 and 48-volt
battery banks) and a 4-position DIP (Dual In-line Package) switch which provides the ability to
change the relay timing confi gurations to allow compatibility with a wider range of generators.
Adjustable settings include starting the generator based on battery voltage, time of day, battery
state of charge, or high temperature. Also includes "Quiet Time" with an easy to set clock. AGS
settings do not interfere with the manual start/stop operation of the generator.
Battery Monitor
The Battery Monitor Kit (ME-BMK) is a single battery AH meter that monitors the condition of the
battery, provides information to let you know how much energy you have available, and lets you
plan your electrical usage to ensure the battery is not being over-discharged. The ME-BMK-NS
version does not include a DC shunt. You must order the ME-BMK to receive a 500A/50mv DC shunt.
Note: The DC shunt is included with MMP and MP Series enclosures. Order the ME-BMK-NS version
when installed with the MMP or MP enclosures.
MagWeb
The MagWeb – Wireless (ME-MW-W) or MagWeb – Ethernet (ME-MW-E) are powerful and cost-
effective tools for remotely monitoring inverters and accessories. Installed on the network, either
MagWeb provides live internet monitoring of the inverter, battery monitor, and automatic generator
start module. Using your always on Internet connection, either MagWeb makes live and historical
conditions available to you.
ME-CB and MPX-CB Conduit Boxes
The ME-CB and MPX-CB conduit boxes are provided for installations where the electrical code
requires AC and/or DC wiring to your inverter to be enclosed and protected by conduit.
Smart Battery Combiner
The Smart Battery Combiner (ME-SBC) is designed to monitor and charge a second battery using
a portion of the current that is charging the main battery. The ME-SBC eliminates a signifi cant
voltage drop, and provides automatic turn-on and turn-off based on adjustable voltage set-
points. This allows different batteries to be charged from a single charging source, and prevents
overcharging/undercharging.
© 2017 Sensata Technologies Page 51