Raven SmarTrax Installation Manual page 18

Chapter 3
Installed Left Steering Hose
FIGURE 8.
Install a -6 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-069) on the open steering cylinder
3.
port.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-672) on the opposite end of the
4.
installed tee fitting.
Connect the other end of the installed hydraulic hose to the fitting installed in Port B3 of the installed flow
5.
switch.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-671) on the 90° end of the installed tee
6.
fitting.
Connect the straight end of the installed hydraulic hose to Port A of the SmarTrax valve.
7.
Installed Right Steering Hose
FIGURE 9.
Locate and disconnect the machine's right steering hose from the right steering cylinder.
8.
Install a -6 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-069) in the open steering cylinder port.
9.
Connect the machine's right steering hose to the opposite end of the installed tee fitting.
10.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-671) on the 90° end of the installed tee
11.
fitting.
Connect the straight end of the installed hydraulic hose to Port B of the SmarTrax valve (P/N 334-0003-
12.
088).
14
Right
Steering
Hose
Left
Steering
Hose
Case IH SPX 3320/3230/3330 SmarTrax™ Installation Manual