Customizing Phone Settings; Adjusting The Volume - Cisco 7970 Phone Manual

Hide thumbs Also See for 7970:

Table of Contents

Customizing Phone Settings

You can personalize your Cisco IP Phone by adjusting settings, as described in the tables below. Keep

in mind a few tips when reviewing this information:

• Most settings are accessible on your phone, but a few are accessed online from your User Options

web pages. See the "Logging In to the User Options Web Pages" section on page 35 for more

information.

• If

is not responsive, your system administrator might have disabled this button on your

phone. Ask your system administrator for more information.

The table below describes how to adjust and save volume levels on your phone.

If you want to...

Adjust the volume

level for a call

Adjust the volume

level for the ringer

Cisco IP Phone 7970

Then...

Press

during a call or after invoking a dial tone.

Doing so adjusts the volume level for the currently active audio mode. For

example, if you increase the volume while you are using the handset, you

have not affected the speakerphone volume.

Press Save to preserve the new volume as the default level for this audio

mode. If you adjust the handset, headset, or speakerphone volume without

saving the change, the volume will revert to the previously-saved level the

next time you use that audio mode.

Press

while the handset is in the cradle and the headset and

speakerphone buttons are off. The new ringer volume is saved automatically.

Customizing Phone Settings

Table of Contents