Copyright; Conformity; Liability And Warranty Conditions - Rational iCombi Pro Original Installation Instructions

The unit must not be used, cleaned or maintained by persons with limited
n
physical, sensory or mental aptitude, or lack of experience or knowledge,
unless they are supervised by a person responsible for their safety and have
received instruction from this person in the risks associated with the unit.
In order to avoid the risk of accidents or damage to property, the manufac-
n
turer advises that technicians attend regular training and safety training ses-
sions.
1.3

Copyright

It is not permitted to pass on product-specific information to third parties. We
reserve the right to implement technical developments and changes in the inter-
est of progress. All rights are reserved, including those of translation and repro-
duction.
1.4

Conformity

The conformity of the devices refers to the complete device at the time of deliv-
ery. In the event of upgrades, modifications and connection of additional func-
tions, the operator is responsible for obtaining an extended conformity.
Observe the relevant country-specific and local standards and regulations con-
cerning the installation and operation of commercial cooking devices.
Conformity Europe
The power connection is established and connected in accordance with IEC
n
60335, taking into account EN 60335 and VDE 0700.
The water connection is established and connected in accordance with IEC
n
61770, taking into account EN 1717 and EN 13077.
The wastewater connection corresponds to the current valid WRAS, SVGW
n
and KIWA regulations and is tested and certified accordingly.
The device is approved for use up to 4000 m above sea level according to
n
IEC 60335.
Conformity USA and Canada
The power connection is built and tested according to UL 197 and
n
CSA C22.2 no. 109.
1.5

Liability and warranty conditions

Liability
Installations and repairs that are not carried out by specialist personnel autho-
rized by the manufacturer or not using original service parts, as well as any tech-
nical changes to the unit that are not approved by the manufacturer, can render
the manufacturer's product liability null and void.
Warranty
The warranty does not cover damage caused by failure to observe this installa-
tion manual.
The following are also excluded from the warranty:
Damage caused by incorrect use, installation, maintenance, repair
n
Damage due to incorrect decalcification
n
80.06.083_iCombi Pro-iCombi Classic_IM_V01_en-US
1 | Introduction
7 / 84