Transport With Lifting Straps - Rational iCombi Pro Original Installation Instructions

4 | Transport
4.4

Transport with lifting straps

Only transport device sizes 6 half size to 10 full size GN with lifting straps.
Risk of crushing and injury due to incorrect lifting with lifting straps
Hands, fingers or feet may be crushed.
Observe the maximum load capacity indicated on the lifting straps. Lift
n
the device only according to the maximum load capacity of the lifting
straps.
Only lift the device by hand using all four lifting straps. Do not use any
n
mechanical aids for lifting.
Risk of damage to the device
Only transport device sizes 6 half size to 10 full size GN with lifting straps
from the manufacturer. The lifting straps are not included in the scope of
delivery and must be ordered separately (article number 91.01.135).
a
All side walls of the device are closed.
1. Slide the seal upwards out of the groove in the base frame.
2. Insert the lifting straps into the side slots on the sides of the device with
the top facing upwards so that they engage. On each side of the device
there are two side slots for lifting straps under the raised bottom seal. Ob-
serve the markings on the top of the lifting straps. Insert the lifting straps
up to the mark on the metal buckle.
3. Pull on the lifting straps and check that the lifting straps are securely en-
gaged.
24 / 84
CAUTION
NOTE
80.06.083_iCombi Pro-iCombi Classic_IM_V01_en-US