Rational iCombi Pro Original Installation Instructions page 37

5. Pull the floor device downwards by the cooking cabinet door. Remove the
part of the pallet under the electrical compartment.
6. Install the device with the rear feet on the installation surface.
7. Carefully lift the device by the cooking cabinet door and pull out the pallet
under the device.
8. Set down the device with the front device feet on the installation surface.
Align the floor device
a
The device is installed and is on the intended installation surface.
1. Place a spirit level in the cooking cabinet of the device.
2. To align the device horizontally on the right, turn the device feet on the
front right and rear right.
80.06.083_iCombi Pro-iCombi Classic_IM_V01_en-US
5 | Setup
37 / 84