2. Set the voltage at the switch in accordance with the power supply. In its
base position, the switch is in Position 2:
Position
1
2
3
1. Close the electrical compartment.
2. Connect the unit to mains power.
3. Switch the unit on.
4. Use the control panel to select the service level. Navigate to Basic Settings -
Other - Installation Voltage. Set the voltage.
5. Switch the unit off and on again. The changes will now be applied.
6. Run a performance check. Verify that the performance data matches the in-
formation on the identification plate.
>>
The voltage is now successfully switched.
80.06.083_iCombi Pro-iCombi Classic_IM_V01_en-US
Voltage (V)
240
208 / 440
480
6 | Electrical connection
49 / 84