Advertisement
Main
Sub
code
code
66
13
Dial number registration
Used to perform send test and adjustments of the dial pulse and the DTMF signal.
Perform send test of the dial pulse and the DTMF signal, and perform adjustments of the make time of the
dial pulse and adjustments of the send level of the DTMF signal.
Sim66-13 DIAL TEST
1:PULSE 10pps
2:PULSE 20pps
3:DTMF
( 1-3 )
After selection
with numeric key
Sim66-13 DIAL TEST
PULSE 10pps
INPUT MAKE TIME
( 26-41 )
Sim66-13 DIAL TEST
PULSE 10pps
INPUT DIAL #
XXXXXXXXXXXXX
Select with numeric keys and press [OK] key.
Sim66-13 DIAL TEST
SEND 10 pps
INPUT DIAL #
XXXXXXXXXXXXX
Sim66-13 DIAL TEST
SENDING 10 pps YYms
INPUT DIAL #
XXXXXXXXXXXX
Completion of execution
(Highlighted during execution)
SIM66-13 initial window
17
DTMF signal send
Used to send the DTMF signal.
Sim66-17 DTMF SIG.
1:MAX
2:SOFT SW.
( 1-2 )
Set the signal send level to
MAX or to the soft setting
value.
X
After selection
with numeric key
[OK] key
[OK] key
Sim66-13 DIAL TEST
1.NormalMode
2.HandsetMode
YY
( 1-2 )
X
YY
After selection
When the soft SW and the SIM DTMF
with numeric key
sound speaker are selected, "Normal"
and "handset" are selected. In another
[OK] key
case, this menu is not displayed.
The default is set to "1590."
Dial input (0 - 9, *, #)
YYms
When the value is great, scroll to the left.
When [C] is pressed, all are cleared.
EXEC
[OK] key
YYms
EXEC
After pressing [OK] key, during execution
[OK] key
EXEC
After selection
Sim66-17 DTMF SIG.
with numeric key
INPUT DIAL #
X
[OK] key
X
After pressing [OK] key,
during execution
Sim66-17 DTMF SIG.
SENDING SIGNAL
X
PRESS BACK TO STOP
Completion of execution
(Highlighted during execution)
SIM66-17 initial window
MX-M182 SIMULATIONS 7-55
Contents
[INTERRUPT] key : Sub code input window
[C] key
: Input clear
Numeric key
: Input of time and dial number
and selection of an item
[OK] key
: Settlement and execution of an input
[START] key
: Settlement of an input
[BACK] key
: Returns to the selection window
XXXXXXXX
: Input dial
Sim66-13 DIAL TEST
After selection
SELECT HIGH LEVEL
with numeric key
1:DEFAULT
2:SOFT SW.
Y
[OK] key
( 1-2 )
X
When "2" is
selected
[OK] key
Sim66-13 DIAL TEST
INPUT LOW LEVEL
DTMF
SOFT SW.
Y
( 0-15 )
XX
Select with numeric keys
[OK] key
and press [OK] key.
Sim66-13 DIAL TEST
DTMF HIGH:XX LOW:YY
INPUT DIAL #
XXXXXXXXXXXXX
EXEC
After pressing [OK] key,
[OK] key
during execution
Sim66-13 DIAL TEST
DTMF HIGH:XX LOW:YY
INPUT DIAL #
XXXXXXXXXXXXX
EXEC
Completion of execution
(Highlighted during execution)
SIM66-13 initial window
[CA] key
Select the dial
[INTERRUPT] key : Sub code input window
number to be sent.
[C] key
(1 dial)
Numeric keys
EXEC
[OK] key
[START] key
[OK] key
[BACK] key
The DTMF signal
of the selected
dial number is
sent until the
interruption
EXEC
command is
delivered by
pressing the stop
key.
[BACK] key
Set the signal send level to 0
or to the soft SW setting
value.
(High group of DTMF signal
send level)
*1 (Low group of DTMF
signal send level)
When "1" is
selected
[OK] key
The default is set to "1590."
Dial input (0 - 9, *, #)
When the value is great,
scroll to the left.
When [C] is pressed, all are
cleared.
: Simulation cancel
: Input clear and stop
: Item selection, dial
number input
: Input value settlement
and execution
: Input value settlement
and execution
: Signal send stop
Remark
Advertisement
