Download Print this page

Sharp MX-M182 Service Manual page 85

Digital multifunctional system
Hide thumbs Also See for MX-M182:

Advertisement

Main
Sub
code
code
51
02
(*1) Valid only when an option is installed. (If an option is not installed, it is not displayed on the adjustment
window.)
(*2) When heavy paper slips in manual feed copy, or when a paper jam occurs in thin paper copy, adjust this
set value to remove the problem.
•Heavy paper slips.
• Thin paper jams.
The adjustment range is 1 - 99.
Select an adjustment item (mode) with the arrow keys, and enter the set value with numeric keys.
When [OK] key is pressed, the entered value is saved to the EEPROM and the machine shifts to the copy
execution window.
After completion of copying, the machine returns to the adjustment value input window.
When [START] key is pressed instead of [OK] key, the machine shifts to the copy execution window and
performs copying.
(Copy start window)
Ready to copy.
S
100%
8 1/2×11
(Copy execution window)
Copies in progress.
S
100%
8 1/2×11
53
08
SPF/RSPF scanning position automatic adjustment
Used to adjust the SPF/RSPF stop position of the mirror unit in the SPF/RSPF copy.
The scanning position is basically determined by the automatic adjustment. It can be also adjusted
manually.
(Automatic adjustment window)
Sim53-8 SPF AUTO
PRESS OK KEY
EXEC
adjustment
OK
Sim53-8 SPF AUTO
EXEC
Sim53-8 SPF AUTO
PRESS OK KEY
EXEC
Increase the set value.
Decrease the set value.
Key
50
Key
[OK] key or [START] Key
50
adjustment
[OK] key or [START] Key
NG
When the automatic adjustment result is NG,
"ERR" is displayed on the value display.
ERR
MX-M182 SIMULATIONS 7-49
Contents
[BACK] key
Adjustment
Copy start
item selection
[OK] key
window
[START] key
Copy execution
[START] key
End of copy execution
(Manual adjustment window)
An optional value can
Sim53-8 SPF AUTO
be entered manually.
When [OK] key or [START] key
is pressed, the entered value
is saved in the EEPROM.
When [START] key is
50
pressed, the window
shifts to the sub code
input standby window.
When, however, [OK] key
[START] Key
is pressed, the window
does not shift.
Sub code input standby window
window
window
Default:
50
Remark

Advertisement

loading

This manual is also suitable for:

Mx-m182dMx-m202dMx-m232d