Download Print this page

Sharp MX-M182 Service Manual page 52

Digital multifunctional system
Hide thumbs Also See for MX-M182:

Advertisement

Main
Sub
code
code
24
05
Duplex print counter clear
Used to clear the duplex print counter.
Sim24-5 COUNTER CLR
DUPLEX COUNTER
CLEAR
AER YOU SURE? EXEC
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
06
Paper feed counter clear
Used to clear the paper feed counter data in each paper feed section.
(Initial window)
Sim24-6 COUNTER CLR
1:BYPASS
2:TRAY1
3:TRAY2
*
TRAY2-TRAY4 are displayed only when they are installed.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
07
Drum counter clear
Used to clear the drum counter and the drum rotating time.
Sim24-7 COUNTER CLR
DRUM COUNTER
CLEAR
AER YOU SURE? EXEC
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
08
Copy counter clear
Used to clear the copy counter.
Sim24-8 COUNTER CLR
COPIES COUNTER
CLEAR
AER YOU SURE? EXEC
[OK] key or [START] key: Clears the copy counter and shifts to the sub code input window.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
09
Printer counter clear
Used to clear the printer counter and other counters.
Select a counter to be cleared and press [OK] key or [START] key. The confirmation window is displayed.
Press [OK] key or [START] key again, and the specified counter is cleared and the machine returns to the
initial window.
Numeric key input
Sim24-9 COUNTER CLR
1:PRINT
2:OTHER
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
(Counter selection window)
Numeric
Key
Sim24-6 COUNTER CLR
4:TRAY3
1:BYPASS
5:TRAY4
2:TRAY1
3:TRAY2
0
[C] Key
[OK] key or
[START] key
1
[BACK] key
[OK] key or [START] key (Counter clear)
MX-M182 SIMULATIONS 7-16
Contents
[OK] key or
[START] key
4:TRAY3
5:TRAY4
2
Return
[OK] key or
[START] key
Sim24-9 COUNTER CLR
1:PRINT
2:OTHER
ARE YOU SURE?
1
(Confirmation window)
Sim24-6 COUNTER CLR
1:BYPASS
4:TRAY3
2:TRAY1
5:TRAY4
3:TRAY2
ARE YOU SURE?
2
Remark
(Execution is not
allowed when
DUPLEX setting is
OFF.)

Advertisement

loading

This manual is also suitable for:

Mx-m182dMx-m202dMx-m232d