Advertisement
Main
Sub
code
code
50
19
Rear edge void adjustment in duplex copy
Used to adjust the rear edge void amount in duplex copy.
When this simulation is executed, the selection window of the adjustment items and the current set value
are displayed.
(Adjustment item selection window)
Sim50-19 DUP R VOID
1:PRV(SIDE1)
2:PRV(SIDE2)
3:RRC-D
[
The adjustment value is in the range of 1 - 99.
When the adjustment value is increased by 1, the rear edge void amount is increased by about 0.1mm.
Select an adjustment item (mode) with the arrow keys, and enter the set value with numeric keys.
When [OK] key is pressed, the entered value is saved to the EEPROM and the machine shifts to the copy
execution window.
After completion of copying, the machine returns to the adjustment value input window.
When [START] key is pressed instead of [OK] key, the machine shifts to the copy execution window and
performs copying
(Copy start window)
Ready to copy.
S
100%
8 1/2×11
(Copy execution window)
Copies in progress.
S
100%
8 1/2×11
51
02
Resist amount adjustment
Used to adjust the contact pressure (warp amount) of paper against the resist roller of the main unit resist
roller and the SPF/RSPF.
When this simulation is executed, the selection window of the adjustment items and the current set value
are displayed.
(Adjustment item selection window)
Sim51-2 RESIST ADJ.
1:TRAY1
2:TRAY2
3:TRAY3
1/4
[
Sim51-2 RESIST ADJ.
10:PRE FEED
4/4
[
Display text
1:TRAY1
2:TRAY2
3:TRAY3
4:TRAY4
5:BYPASS
6:RSPF(SIDE1)
7:RSPF(SIDE2)
8:RSPF A5
9:DUPLEX
10: PRE FEED
Display text array : Adjustment mode
1: PRV (SIDE1) : Paper rear edge void amount (1st print surface)
50
2: PRV (SIDE2) : Paper rear edge void amount (2nd print surface)
50
3: RRC-D
50
1- 99]
50
Sim51-2 RESIST ADJ.
4:TRAY4
50
5:BYPASS
50
6:RSPF(SIDE1)
50
2/4
1- 99]
50
50
1- 99]
50
:Adjustment mode
:Resist amount in paper feed from TRAY1
:Resist amount in paper feed from TRAY2 (*1)
:Resist amount in paper feed from TRAY3 (*1)
:Resist amount in paper feed from TRAY4 (*1)
:Resist amount in paper feed from manual tray
:Resist amount on SPF/RSPF document surface (*1)
:resist amount on RSPF document back (*1)
:Document resist amount in A5 document back transport (*1)
:Resist amount in DUPLEX print (Second print surface) (*1)
:Pre-feed time of the manual feed tray paper feed. (*2)
MX-M182 SIMULATIONS 7-48
Contents
: Print start position (2nd print surface)
[BACK] key
Adjustment
Copy start
[OK] key
item selection
window
[START] key
Copy execution
[START] key
End of copy execution
50
50
50
[
1- 99]
50
2
(Execution is
allowed when
DUPLEX setting is
ON, and RSPF is
installed.)
Default:
PRV(SIDE1): 50
PRV(SIDE2): 50
RRC-D: 50
window
window
Default:
TRAY1: 50
TRAY2: 50
TRAY3: 50
TRAY4: 50
BYPASS: 50
RSPF(SIDE1): 50
RSPF(SIDE2): 50
Sim51-2 RESIST ADJ.
RSPF A5: 50
7:RSPF(SIDE2)
50
DUPLEX: 50
8:RSPF A5
50
PRE FEED: 32
9:DUPLEX
50
3/4
[
1- 99]
50
Remark
Advertisement
