Advertisement
Main
Sub
code
code
66
42
PIC program writing
Used to write the program again into the power control which is installed to the FAX BOX.
Sim66-42 PIC RELOAD
ARE YOU SURE?
[CA] key
[INTERRUPT] key : Sub code input window
[OK] key
[BACK] key
43
PIC adjustment value writing
Used to write the adjustment value of the program into the power control which is installed to the FAX BOX.
Window display
1:CI_LEVEL_JUDGE
2:CI_CYCLE_MIN
3:CI_CYCLE_MAX
Sim66-43 PIC ADJUST
1:CI LEVEL
2:CI CYCLE MIN
3:CI CYCLE MAX
( 1 - 9 )
[CA] key
[INTERRUPT] key : Sub code input window
[OK] key
[BACK] key
52
Pseudo ringer check
• The pseudo ringer sound is delivered both from the machine (speaker).
• This operation is continued until the interruption command is made by pressing RETURN key.
• The LCD displays the TEL/LIU status and the HOOK status.
• While the pseudo ringer is delivered, the RBT )ring back tone) is delivered to the line. The bell is ON for
1sec and OFF for 2sec.
Sim66-52 PSEUDO RNG
PSEUDO RINGER CHK
[CA] key
[INTERRUPT] key : Sub code input window
[OK] key
[BACK] key
[START] key
[C] key
67
50
USB reception speed adjustment
Used to set an limitation on the print data reception speed when the USB transfer speed is at full speed.
Sim67-50 USB SPEED
1:FULL SPEED
[
* When images are disturbed in printing through USB, change the setting and try again.
[CA] key: Exits from the simulation mode.
[INTERRUPT] key: Shifts to the sub code entry window.
After pressing
Sim66-42 PIC RELOAD
[OK] key, during
ARE YOU SURE?
execution
[OK] key
EXEC
During execution, [EXEC] is
: Simulation cancel
highlighted.
: Settlement
: Returns to the simulation
code input window.
Setting
Window display
range
2 - 15
4:CI_COUNT
1 - 254
5:RES_3.3V_LEVEL_JUDGE
2 - 255
6:EXHS_LEVEL_JUDGE
After inputting
Sim66-43 PIC ADJUST
with numeric
CI LEVEL
key
[OK] key
X
( 2 - 15 )
XX: The current set value is displayed.
YY: Input value
9. When
Sim66-43 PIC ADJUST
WRITE is
ARE YOU SURE?
selected
[OK] key
: Simulation cancel
During execution, [EXEC] is
highlighted.
: Settlement
: Returns to the simulation
code input window.
After pressing
Sim66-52 PSEUDO RNG
[OK] key, during
execution
PSEUDO RINGER CHK
PRESS BACK TO STOP
[OK] key
EXEC
: Simulation cancel
: Execution
: Returns to the selection window.
: Execution
: Disable
Display
1
Fast
2
2
3
4
Slow
1- 4]
2
MX-M182 SIMULATIONS 7-60
Contents
Sim66-42 PIC RELOAD
OK
EXEC
[BACK] key
Sub code input window
Setting
Window display
range
2 - 15
7:RHS_LEVEL_JUDGE
2 - 15
8:SON_TIMEOUT
2 - 255
9:WRITE
After inputting
with numeric
key
XX
SIM66-43 initial window
[OK] key
YY
Sim66-43 PIC ADJUST
OK
EXEC
After execution, the display shifts
to the sub code input window.
Sim66-52 PSEUDO RNG
PSEUDO RINGER CHK
[BACK] key
EXEC
: Setting
: FAST
: NORMAL 1
: NORMAL 2
: SAFE
Incase of writing
error, "NG" is
displayed.
EXEC
Setting
range
2 - 15
1 - 127
-
Incase of writing
error, "NG" is
displayed.
EXEC
[BACK] key
EXEC
Remark
Default:
1: 6
2: 10
3: 142
4: 3
5: 15
6: 240
7: 2
8: 20
Default:
3
Advertisement
