Table of Contents
Advertisement
RealTek LAN1 Bootrom
Decide whether to invoke the boot ROM of the onboard LAN chip.
3-7-3 Onboard Super IO Function
Onboard Serial Port1
Onboard Serial Port2
Onboard Serial Port3
Onboard Serial Port4
UART Mold Select
*IR Duplex Mold
Onboard Parallel Port
Parallel Port Mold
*ECP Mold Use DMA
Watchdog Timer Select
*Watchdog Timer Value
*WATCHDOG Timer Unit
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Onboard Serial Port 1/2
The optional settings are ： Disabled, 3F8/IRQ4 ， 2F8/IRQ3, 3E8/IRQ4 ， 2E8/IRQ3, and Auto.
Onboard Serial Port 3/4
The optional settings are ： Disabled, 3F8/IRQ5 ， 2F8/IRQ10, 3E8/IRQ5 ， 2E8/IRQ10 and Auto.
UART2 Mode Select
This item allows you to determine which InfraRed(IR) function of the onboard I/O chip. The
optional settings are Normal and IrDA.
IrDA Duplex Mode
This field is available when UART Mode is set to either ASKIR or IrDA. This item enables you
to determine the infrared function of the onboard infrared chip. The options are Full and Half
Phoenix – AwardBIOS CMOS Setup Utility
Onboard Super IO Function
3F8/IRQ4
2F8/IRQ3
3E8/IRQ5
2E8/IRQ10
Normal
Half
3F8/IRQ7
SPP
3
Disabled
255
Sec.
F6:Optimized Defaults
Menu Level >>
F7:Standard Defaults
28
Item Help
Advertisement
Table of Contents
