Hardware Functions; Using The Debug Console - VIA Technologies SOM-3000-STK Quick Start Manual

VIA SOM-3000-STK Android 12.0 EVK Quick Start Guide

3. Hardware Functions

This section explains how to enable and test the hardware functions precompiled in the VIA SOM-3000-STK
Android 12.0 EVK.

3.1 Using the Debug Console

Follow the steps below to use the debug console:
Step 1
Insert one plug connector of the 4-pin FFC cable into the J3 port labeled "UART0" on the VIA SOM-3000
module, ensuring that the gold finger of the FFC cable faces down.
UART0 Port
6