Designation - SaMASZ SAMBA 160 Operator's Manual

3. DESIGNATION

Light class rear disk mowers SAMBA are designed to operate on smaller farms, and are used for
mowing standing grass: common grass, medick, etc. on meadows and on stone free fields as well as
forming swath out of these. They do well in mountainous as well as swamp areas, where the machine's
and tractor's weight is of great importance. Application of innovative suspension assembly allows for
adjusting optimal pressure of cutter bar onto the ground.
Meadows or fields to be mowed should be even, previously prepared by rolling and other
processing.
WARNING!
Use of the mower for purposes other than mentioned herein is forbidden.
Different use than the above mentioned shall be considered as improper and
may lead to revoking of the warranty. The mower should be operated,
maintained and repaired only by personnel who are familiarized with its
detailed specifications and safety rules and procedures. Willful modifications to
the mower may lead to revoking the warranty.
Tab. 1. Mowing heights depending on cutter bar and its inclination angle
„Lite Cut" Cutter bar
No tilt
Standard mowing height
Cutting height setting increased for about 20 mm
Cutting height setting increased for about 25 mm
Cutting height setting increased for about 30 mm
Operator's manual
Instrukcja obsługi
- 3 -
Lightweight, rear disc mowers
SAMBA
2° tilt