SaMASZ SAMBA 160 Operator's Manual page 42

Calculating minimum weight of front balast M
❑
Calculating real axis load at tractor's front axis T
❑
*If the value of front axis load (T
axis.
Calculating total weight of tractor-machine assembly M
❑
Calculating real axis load at tractor's rear axis T
❑
Tyre load capacity – apply double the load indicated by the tyres' manufacturer.
❑
Enter the above calculation data and technical data provided by the manufacturer in the below table.
Minimum weight of front
ballast
M
Pmin
Total weight
M
C
Front axis load
T
P rzecz.
Rear axis load
T
T rzecz.
Minimum ballast must be reached by mounting the machine or additional weights provided on the tractor.
Values resulting from calculations should be lower than or even to values given in technical specification.
Operator's manual
Instrukcja obsługi
) is less than 20 % of tractor's overall weight (T), apply additional load on the front
P rzecz
Real value from
calculations
≤
≤
≤
- 40 -
Lightweight, rear disc mowers
– machine mounted at tractor's rear:
P min.
:
P rzecz .
:
C
:
T rzecz.
Value to technical
specification
≤
≤
SAMBA
Double value of
tyre capacity load