SaMASZ SAMBA 160 Operator's Manual page 28

Lightweight, rear disc mowers
Operator's manual
Instrukcja obsługi
SAMBA
Fig. 20. Quick replacement of cutting knives
130 Nm
Fig. 21. Knife mounting torqueing
NOTICE:
Before you change the knife check disc turns (Fig. 22).
NOTICE:
Because of high discs rpm, knife mounting should be changed in sets of the same
weight. Improperly changed knife mounting will damage disc bearings.
NOTICE:
Different mounting of the knives will block the mower. When mounting pay particular
attention to loose rotation of the knife on the knife mounting pin.
- 26 -