Warranty Card; Warranty Terms; Warranty Claim Procedure - SaMASZ SAMBA 160 Operator's Manual

Lightweight, rear disc mower
Hide thumbs Also See for SAMBA 160:
Table of Contents

Advertisement

10. WARRANTY CARD

The product quality has been checked and meets the required standards and regulations and is
permitted for use.
WARNING!
A warranty card without the required information or with corrected or illegible
information – is invalid.

11. WARRANTY TERMS

11.1. Warranty claim procedure

1. The manufacturer guarantees its products against faults in materials or production.
2. Faults or damages to the mower found within 24 month period from the date of purchase shall be
removed free of charge at the purchaser.
3. Faults or damages should be submitted personally, on letter or by telephone. Repairs shall be
carried out within 14 days. Any repair which is subject to warranty should be carried out by an
authorized SaMASZ dealer.
4. Warranty claims regarding replacing of the product or repayment are considered within 14 days by
the Manufacturer.
5. The following cases are not covered by the warranty:
a) normal wearing of parts such as: disks, slides, gears and parts within, bushings and
sliding bushes, joints, knife holders, cutting knives, knife mountings, v-belts, bearings,
canvas covers, tires, fastening elements, etc. These repairs may be carried out only at the
purchaser cost.
b) use of the mower for any purpose other than described in the operator's manual,
c) working on stony fields and consequences,
d) running into any obstacle,
e) too fast lowering of the cutter bar onto the ground,
f) force majeure or other occurrence, for which the manufacturer does not bear any
responsibility.
6. The costs of technical assessment are borne by the Purchaser - if the Manufacturer determines that
the product being subject to claim is defect free and what is confirmed by a further expertise.
7. The Manufacturer has the right to cancel the warranty in the following cases:
a) interference of the interior of the mower, changes of its mechanical design or intentional
damages, bending parts of the mower and so on.
Operator's manual
Instrukcja obsługi
LIGHT REAR DISK MOWER
- 35 -
Lightweight, rear disc mowers
SAMBA
Serial number
Date of manufacture
Manufacturer stamp
QC signature
Date of purchase
Dealer stamp
Dealer signature

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Samba 200Samba 240Samba 280Samba 320

Table of Contents