Before First Use - Gastroback DESIGN MULTI JUICER DIGITAL Operating Instructions Manual

BEFORE FIRST USE

WARNING:
part of it! The knives of the juicing sieve and blade assemblies (optional acces-
sories) are very sharp! Always use special care when handling these parts.
Only hold these parts by the rim. Always unplug the appliance before cleaning
or moving it, before assembling or disassembling any parts, and when the appli-
ance is not in use. Do not place or immerse the motor base or power cord in water
or other liquids or spill any liquids on the exterior of the appliance. Do not use any
abrasive or corrosive cleaners for cleaning to avoid damage to the surfaces. Do
not place the motor base in an automatic dishwasher.
1. Unpack the appliance and all parts and accessories carefully. Handle the
juicing sieve and blade assemblies (optional accessories) with special care,
because the integrated knives are very sharp. Check that no parts are damaged
or missing (see: 'Knowing Your New Multi Juicer').
2. Carefully remove all packaging, shipping materials, stickers, and promotional
materials. However, DO NOT remove the model label or warning labels.
3. Before first use and after an elongated period of storage, clean all parts of the
appliance (see: 'Care and Cleaning'). If required, take the power cord out of
the cord storage in the baseplate of the motor base. Push the power cord into
the guiding groove at the rear part of the baseplate.
4. Position the motor base with the display facing towards you on the designated
working place near an appropriate wall power outlet. The locking arm must be
lowered to the horizontal open position.
WARNING:
(approx. 110 cm) to avoid overheating and risk of fire and electric shock!
Important: When operating the appliance for the first time, there may be a slight
burnt smell from the motor. There is no need for concern. However, if the problem
persists even after repeated use, get in contact with an authorized service centre.
DO NOT let young children play with the appliance or any
For operation, always unwind the power cord completely
97