Care And Cleaning; Disassembling The Juicing System - Gastroback DESIGN MULTI JUICER DIGITAL Operating Instructions Manual

CARE AND CLEANING

WARNING:
young children. Always switch OFF (turn the selection dial to the "OFF" position,
switch the power switch to "O") and unplug the appliance, before cleaning the
appliance.
Do not spill or pour any liquids on or in the motor base or power cord. Do not
place or immerse the motor base or power cord in any liquids to avoid damage,
risk of fire, and electric shock. Keep the motor base always completely dry and
clean. Optional accessories: Glass can easily break or crack. Always use special
care while handling the glass containers (mixing/mincing jugs, grinding cup). Do
not expose the glass containers to extreme temperature variations. Do not fill hot
food or hot liquids into the glass containers or place the glass containers into hot
liquids or on hot surfaces.
Do not use abrasive cleaning agents or aggressive cleaners (e.g. bleach, solving
agents) for cleaning the appliance or any part of it, to avoid damage to the sur-
faces and sealing rings. Do not use any hard or sharp-edged objects for cleaning
(e.g. scoring pads, metal cooking utensils). Do not use violence!
DO NOT place the motor base or power cord in an automatic dishwasher!
Clean the appliance and accessories always immediately after use, to avoid the
build-up of stubborn residues and discolouration. Do not store your food in the con-
tainers of the appliance.

DISASSEMBLING THE JUICING SYSTEM

After operation, you should always disassemble the juicing system, empty the pulp
container and juice jug, and rinse all parts at once to avoid discolouration of the
plastic parts and food drying on the surfaces. For this, proceed as follows.
WARNING:
Always handle the juicing sieve by the rim or the dark drive coupling.
Tip: It is good advice to hold a sufficiently large tray at hand for placing the parts
of the juicing system on it. This may keep your working space clean.
1. Ensure that the selection dial is turned to the "OFF" position (display is dark), the
power switch at the rear of the appliance is switched off ("O"), and the motor
is idle. Unplug the appliance.
2. Remove the juice jug. To avoid that juices still drip out of the juice spout, turn the
drip-stop at the juice spout by 180°. Slowly empty the juice jug.
124
Always ensure that all parts of the appliance are out of reach of
The blades in the base plate of the juicing sieve are very sharp.